Skip to content
Boddy Viðgerðir Henriks

Land Cruiser BJ42 — body rebuilt and chassis stripped

Doors, roof, wings, sills, floors and brackets rebuilt on a BJ42, one piece at a time, with the chassis stripped and painted alongside.

Vehicle
Toyota Land Cruiser BJ42
Service
Classic car restorationRust repairModifications and custom fabrication

In this stage the body was rebuilt, one piece at a time. Doors, roof, rear door, wings, front panel, sills, floors and inner panels all went through the same treatment: the rusted steel cut out, a new piece shaped to the original form and welded in, and the weld ground back until the surface was straight.

Some of it could not be bought. Mounts, reinforcements and sections that are no longer manufactured were made here from the old parts or from measurements taken off the car. That is a large part of classic work — on a car of this age the parts list stopped answering long ago.

While the body was being rebuilt, the chassis was stripped and finished. The photographs show what each piece looked like along the way: the old steel, the new steel and the surface after grinding.

Photographs of the job

Body of a Land Cruiser BJ42 on the chassis, stripped to bare metalIn progress
Old sill and a newly made section side by side on the workshop floorIn progress
The old sill and the new section that replaced it.
Rear door of a Land Cruiser BJ42 in primer on a standIn progress
Door of a Land Cruiser BJ42 in primer hanging from the liftIn progress
Close-up of a Land Cruiser BJ42 body panel in primerIn progress
Land Cruiser BJ42 body panels hanging to dryIn progress
Rear wing of a Land Cruiser BJ42 in primer on a standIn progress
Inner wing of a Land Cruiser BJ42 in primerIn progress
Door and window frame of a Land Cruiser BJ42 in primerIn progress
Door frame of a Land Cruiser BJ42 hanging in the workshopIn progress
New sill section for a Land Cruiser BJ42 in primerIn progress
Land Cruiser BJ42 body panel on the bench under a work lightIn progress
Roof section of a Land Cruiser BJ42 with window openings, stripped to bare metalIn progress
Corner of the roof on a Land Cruiser BJ42 in bare metalIn progress
Rear door and window frame of a Land Cruiser BJ42 on the floorIn progress
Front panel of a Land Cruiser BJ42 with headlight openings on the benchIn progress
Front panel and vent parts of a Land Cruiser BJ42 on the benchIn progress
Front panel of a Land Cruiser BJ42 in primerIn progress
Working on the front panel of a Land Cruiser BJ42 at the benchIn progress
Rear door of a Land Cruiser BJ42 in primer on the benchIn progress
Door of a Land Cruiser BJ42 on the bench with a wooden malletIn progress
Long sill section for a Land Cruiser BJ42 on the benchIn progress
Tailgate of a Land Cruiser BJ42 in primerIn progress
Tailgate of a Land Cruiser BJ42 with a rusted strip due for replacementIn progress
Window frame of a Land Cruiser BJ42 in bare metal after repairIn progress
Door skin of a Land Cruiser BJ42 in bare metalIn progress
Rear door of a Land Cruiser BJ42 in bare metal with the window openingIn progress
Window frame and tailgate of a Land Cruiser BJ42 readyIn progress
Front section of the body on a Land Cruiser BJ42 on a standIn progress
Body of a Land Cruiser BJ42 with roll bar up on the liftIn progress
New plate welded into the inner panel of a Land Cruiser BJ42In progress
Inner rear panel and mount in a Land Cruiser BJ42In progress
New steel welded into the inner rear corner of a Land Cruiser BJ42In progress
New brackets fabricated for a Land Cruiser BJ42In progress
Mounts that are no longer available are made from the old ones.
Roll bar mount welded into the body of a Land Cruiser BJ42In progress
A new floor section and the old rusted one side by sideIn progress
The new section on the left, the old one on the right.
Rear section of the body on a Land Cruiser BJ42 in bare metalIn progress
Body of a Land Cruiser BJ42 on a scissor lift in the workshopIn progress
Body of a Land Cruiser BJ42 seen from the side on the liftIn progress
Body of a Land Cruiser BJ42 under construction in the workshopIn progress
New body panel for a Land Cruiser BJ42 on the benchIn progress
Body of a Land Cruiser BJ42 with roll bar seen from the rearIn progress
Underside of the body on a Land Cruiser BJ42 after repairIn progress
Corner on the underside of a Land Cruiser BJ42 bodyIn progress
Front body section of a Land Cruiser BJ42 on a stand in the workshopIn progress
New floor in the load bed of a Land Cruiser BJ42In progress
Body of a Land Cruiser BJ42 from the rear with its new floorIn progress
Chassis of a Land Cruiser BJ42 with axles, body removedIn progress
Chassis of a Land Cruiser BJ42 masked and ready for finishingIn progress
Custom-made bracket for a Land Cruiser BJ42 in the viceIn progress
Black-finished front mount for a Land Cruiser BJ42 hanging upIn progress
Chassis of a Land Cruiser BJ42 finished and painted blackAfter
The chassis ready to take the body.

The service behind this job

More work

See all work
New body mounts and rubbers ready for a Land Cruiser BJ42

Toyota Land Cruiser BJ42

Land Cruiser BJ42 — the car back together

The final stage: new body mounts, doors and front end fitted, sound deadening in the bed — and the BJ42 out of the workshop on its own wheels.

Read more
White VW Beetle outside the workshop before the floor repair began

Volkswagen Bjalla

VW Beetle — new floor pans welded in

The floor of this Beetle was gone on both sides. New floor pans went in, were welded up and the underside protected — a car that stood on a perforated floor now stands on a sound one.

Read more
Section cut out of the inner sill of a Land Cruiser, eaten through by rust

Toyota Land Cruiser

Sill repair on a 25-year-old Land Cruiser

Rust had eaten through the sill of a twenty-five-year-old Land Cruiser, both the inner structure and the outer skin. Everything that was gone was cut out, new pieces welded in and the lower edge protected.

Read more

Get in touch

Tell us what the car needs. Calling is quickest, and the same number takes photographs on WhatsApp.

Address

Boddy Viðgerðir Henriks
Suðurhraun 2b
210 Garðabær

Plus Code: 33HF+CM Garðabær

Get directions

Opening hours

Monday–Friday
09:00–17:00
Saturday–Sunday
Closed

Call ahead for a larger job, so the car can be taken in at the right time.

Book a timeCall