Land Cruiser 120 — rear crossmember replaced
The rear crossmember under a Land Cruiser 120 was eaten through. A new one was fabricated and welded in its place.
- Vehicle
- Toyota Land Cruiser 120
The rear crossmember sits lowest and furthest back, straight in what the tyres throw up. On a Land Cruiser 120 it is double-skinned and holds water, and once it starts to go it usually goes right through.
The old member was eaten through over a long stretch, with holes you could put a hand through. It was cut out and a new one fabricated from it, with the same mounts and holes in the same places, and welded in.
This is structure: the towing bracket and rear mounts hang off this member, and it is one of the things an inspector looks at. The new member was protected before the car went out.
Photographs of the job
Before
After


